Fujifilm EF-60 TTL Flash with the X100VI: Setup and Bounce

By Foto Erhardt | Kameras, Objektive & Zubehör ► günstig kaufen | Published: 2026-11-02

Category: How-to Guides

Learn how to set up the Fujifilm EF-60 TTL flash on the X100VI and use bounce flash for natural indoor light. Step-by-step guide with practical tips.

Quick answer

Mount the Fujifilm EF-60 TTL flash on the X100VI's hot shoe, set the camera's flash mode to TTL, and tilt the flash head toward a nearby wall or ceiling to bounce light for softer indoor portraits.

Why bounce flash beats direct flash on the X100VI

The X100VI's built-in flash is handy for fill, but direct light creates harsh shadows and flat faces. The EF-60's tilting head lets you redirect light to a ceiling or wall, spreading it out for a more natural look. This is especially useful for indoor events or portraits where you want to avoid the 'deer in headlights' effect.

When TTL helps and when to switch to manual

TTL metering is reliable for run-and-gun situations because the flash reads the scene and adjusts output automatically. However, if you're bouncing off a very high or dark surface, TTL can underexpose. In those cases, switch the flash to manual and adjust power manually—start around 1/4 power and tweak from there.

Step-by-step setup and bounce technique

Mount the flash and power on: Slide the EF-60 into the X100VI's hot shoe until it clicks, then turn on both camera and flash. Check that the flash's LCD shows TTL mode. Common mistake: not tightening the locking ring, which can cause poor contact and erratic firing.
Set camera flash mode to TTL: In the X100VI's shooting menu, go to Flash Function Settings and choose TTL. This lets the camera and flash communicate for automatic exposure. If TTL is greyed out, ensure the flash is fully seated and turned on.
Adjust flash exposure compensation: Start at 0 EV and take a test shot. If the image is too bright, dial compensation down to -0.7 or -1.0; if too dark, increase to +0.7. Checkpoint: review the histogram—blown highlights mean you need less flash.
Tilt the flash head for bounce: Rotate the EF-60's head upward (typically 45–90 degrees) toward a white or neutral ceiling. Avoid colored walls to prevent color casts. Common mistake: bouncing off a ceiling that's too high or dark—move closer or increase flash power.
Fine-tune with a diffuser or bounce card: If you need softer light and lack a bounce surface, attach a small diffuser or use the built-in bounce card (if available) to spread the light. Checkpoint: a diffuser reduces output; you may need to raise ISO or flash power.

Product facts

Fujifilm Blitzgerät EF-60 TTL: The EF-60 is a compact, high-performance TTL flash designed for Fujifilm X-series and GFX-series cameras. It balances size and output for on-camera use, making it a natural match for the compact X100VI.
Fujifilm Blitzgerät EF-60 TTL