SmallRig 5622 Leather Case for X100VI: Fit Guide

Quick Answer

The SmallRig 5622 Leather Case fits the Fujifilm X100VI precisely. Follow these steps to install it without scratching your camera or blocking ports.

Step-by-Step Fit Guide

1. 1. Remove the base plate: Unscrew the SmallRig 5622’s bottom plate completely. Set it aside with the screws in a safe place. Do not force the plate off — it should slide free once the screws are out. Check that the screws are not cross-threaded before reinstalling.
2. 2. Slide the case onto the camera body: Hold the X100VI with the lens facing away from you. Align the case’s top edge with the camera’s top plate, then gently press the case down so the leather wraps around the sides. The grip area should sit flush against the right-hand contour. If the case feels tight, do not force it — you may have the wrong orientation. Rotate it 180° and try again.
3. 3. Secure the bottom plate: Place the metal bottom plate against the camera’s base, lining up the tripod socket and the two screw holes. Hand-tighten the screws in a cross pattern (top-left, bottom-right, then the remaining two). Stop when you feel resistance — overtightening can crack the leather or strip the threads. Use a coin or the included tool, not a power driver. The plate should be snug, not torqued.
4. 4. Verify cutout alignment: Check that the USB-C port, battery door, and memory card slot are fully uncovered. Press the shutter button and the rear dial to confirm they move freely. Look through the viewfinder — the case should not obstruct the eyecup. If a cutout is misaligned, loosen the screws slightly, shift the case, and retighten.
5. 5. Test stability and grip: Hold the camera in your shooting hand and shake it gently. The case should not shift or rattle. Then set the camera down on a flat surface — the bottom plate must sit level so the camera does not wobble. A slight wobble means one screw is tighter than the others. Loosen all four and retighten evenly.

Product Facts

• SmallRig 5622 Leather Case Kit für X100VI schwarz: Das SmallRig 5622 Leather Case Kit für die X100VI Kamera bietet optimalen Schutz in elegantem Design. Hergestellt aus hochwertigem Leder kombiniert es Stil und Funktionalität und schützt Ihre Kamera zuverlässig vor Kratzern, Stößen und leichten Stürzen. The genuine leather padding absorbs minor impacts and prevents scuffs during daily carry, while the precise cutouts keep all buttons and the screen accessible.